To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi FR-F500 and is the answer not in the manual?
General| Series | FR-F500 |
|---|---|
| Frequency Range | 50/60 Hz |
| Overload Capacity | 150% for 60 seconds |
| Power Range | 0.4 kW to 500 kW |
| Output Frequency Range | 0 to 400 Hz |
| Control Method | V/f control, vector control |
| Communication Options | RS-485 |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage |
| Braking Unit | Optional |
| Ambient Temperature | -10 to +50 °C |
| Enclosure | IP20 |
| Input Voltage | 3-Phase 200-240VAC, 380-500VAC, 500-690VAC |
| Output Voltage | 3-Phase 200-240VAC, 380-500VAC, 500-690VAC (equal to input voltage) |
Information on handling and checks before operating the inverter.
Overview of essential devices and their connections for inverter operation.
Details on the physical appearance and internal structure of the inverter.
Guidelines and requirements for installing the inverter safely and correctly.
Terminal connection diagrams and instructions for main and control circuit wiring.
Information on power harmonics, RF noise, and leakage currents.
Details on devices and parts required for different operation modes.
Names and functions of the operation panel (FR-DU04) and its display modes.
Procedures for checking and setting inverter parameters.
Pre-operation checks and detailed steps for external, PU, and combined operation modes.
Comprehensive list of all inverter parameters with their settings and functions.
Detailed explanation of specific parameter functions and their applications.
Safety precautions and procedures for maintaining and inspecting the inverter.
Definitions of major and minor faults, their indications, and corrective actions.
Detailed specifications including model differences, electrical ratings, and physical dimensions.
