Mitsubishi FREQROL FR-A044-3.7K

21. SELECTING GENERAL-PURPOSE MAGNETIC FLUX VECTOR CONTROL
!Setting wthod when wlrlng dlstance Is particularly long
1. !Setting procedure
(1) If the maximum wiring distance is longer than the values given in the following table, set
parameter
98 to invalidate the current limits.
(The factory setting is 'O", but setting this to '8" is recommended.)
Operafion
Low.Noise 1% IIWm 1% 1300m I5~m 1500m 15~m
(1641 feet) (1641 feel) (1641 teet) (1641 feel)
(W.6 feel) (656.4 feet)
(656.4 feet)
Operation (1641 feet) (1641 feel) (1641 feel)
(964.6 feel) (656.4 teel)
(3282 teel) (9846 feel)
-55-
. .