8-17
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
Starter - Inspect
Visually check the starter for damage.
If the starter is dusty, blow dirt using compressed air.
Note: If the starter is defective, consult a dealer of Mit-
subishi Heavy Industries, Ltd.
Fig. 8-27 Starter - Inspect
Alternator - Inspect
Visually check the alternator for damage.
If the alternator is dusty, blow foreign material using
compressed air.
Remove the belt and check that the movement is
smooth when rotating the pulley by hand.
Note: If the alternator is defective, consult a dealer of
Mitsubishi Heavy Industries, Ltd.
Fig. 8-28 Alternator - Inspect
To Next Page
Loading...
Need help?
General
