Mitsubishi LU2-430 User Manual

3. SELECTION OF THREAD
It is recommended to use "8" twist thread for the left
needle (viewed from front) and "Z" twist thread for
the right needle. When it is difficult to use threads
depending on needles, use "Z" twist thread for both
needles. For bobbin thread,- either thread will do.
4. THREADING OF NEEDLE THREADS
(1) Pass each needle thread through thread guide "A".
Note: When thin slippery thread (such as polyester
or filament thread) is used, pass the thread
through thread guide "B" and then "A".
(2) With the take-up lever located at the uppermost
position, pass each needle thread in the order
shown in the figure below.
Note: Pressing the needle thread tension regulator
button (shown in figure below) will open the
tension disc, thereby allowing the needle
thread to be picked up easily.
Needle thread tension regulator button
(HD®®
llMCiiD
®(0
(Expanded view)
Thread
Lead thread Lead thread
leftward. rightward.
. S twist thread
"Z" twist thread
A B ABA
iijLd
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Mitsubishi LU2-430 Specifications

General

Brand	Mitsubishi
Model	LU2-430
Category	Sewing Machine
Language	English