3
SAFETY, GENERAL INFORMATION AND STANDARD TORQUE SPECIFICATIONS
SAFETY
WARNING: Read the operators manual to
familiarize you with the correct control
functions.
This symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED.
The message that follows the symbol contains important information about safety carefully read the message.
Make sure you fully understand the causes of possible injury or death.
To prevent injury always follow the Warning, Caution and
Danger notes in this section and throughout the manual.
WARNING: Operate the machine and
equipment controls from the seat
positron only.
Any other method could result in
serious injury.
WARNING: This is a one man machine,no
riders allowed.
WARNING: Before starting the engine,
study the operator’s manual safety
messages.
Read all safety signs on the machine clear
the area of other persons.
Learn and practice safe use of controls
before operating.
It is your responsibility to understand
and follow manufacturer’s instructions on
machine operation, service, and to observe
pertinent laws and regulations.
WARNING: If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can
be required includes hard hats, safety shoes,
ear protection, eye or face protection, heavy
gloves and reflector clothing.
NOTE: Operator's Manuals may be obtained from your
dealer.
WARNING: When working in the area of the
fan belt with the engine running avoid loose
clothing if possible and use extreme
caution.
WARNING: When doing checks and
testing on the equipment hydraulics,
follow the procedures as they are
written.
DO NOT change the procedure.
WARNING: When putting the
hydraulic cylinders on this machine
through the necessary cycles to check
operation or to remove air from a
circuit. Make sure all people are out
of the way.
To Next Page
Loading...
Need help?
General
