56
OPERATING PROCEDURE PHOTOS
3. Removing the indoor heat exchanger.
(1) Remove the grill. (Refer to 1(1) (2))
(2) Remove the screws on both side and in front of the front
panel. (Photo 5)
(3) Remove the screws of the nozzle assembly. (Photo 6)
(4) Remove the electronic box . (Refer to 1)
(5) Remove the indoor fan motor . (Refer to 2)
(6) Remove the screws of the motor support .
(7) Remove the fan casing . (Iower)
(8) Remove the insullations of the drain pan and remove the
screws . (Photo 7)
(9) Remove the screws under the drain pan .(Photo 8)
(10) Remove the drain pan .
(11) Remove the indoor heat exchanger.
Photo 5
Photo 6
Photo 7
Photo 8
Screws
Insullations and screws
screws
Screws
OB267--2.qxp 01.4.13 1:01 PM Page 56
To Next Page
Loading...
