To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi MSH-30RV and is the answer not in the manual?
General| Cooling Capacity | 3.0 kW |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Type | Split System |
| Net Weight (Indoor Unit) | 9 kg |
Details the various parts and their functions within the indoor unit, illustrated with diagrams.
Explains the operation display, buttons, and functions of the wireless remote controller.
Lists the accessories included with the indoor unit, such as plates, screws, and filters.
Lists the accessories included with the outdoor unit, such as drain sockets and caps.
Details electrical data, fan motor specs, and dimensions for indoor units.
Details electrical data, fan motor specs, dimensions, and refrigerant capacity for outdoor units.
Provides detailed dimensions and required installation space for indoor units.
Provides detailed dimensions and required installation space for outdoor units.
Illustrates the electrical wiring for the MSH-18RV indoor unit.
Illustrates the electrical wiring for the MUH-18RV outdoor unit.
Shows the refrigerant flow and components for the MSH-18RV indoor/outdoor units.
Shows the refrigerant flow and components for the MSH-24RV indoor/outdoor units.
Illustrates cooling capacity, total input, and correction factors based on temperatures.
Illustrates heating capacity and total input based on temperatures.
Shows outdoor low pressure and unit current during cool operation.
Shows outdoor unit current during heat operation.
Details the functions and operation of the wireless remote controller.
Explains the operation indicator lamp and its meaning for different states.
Explains the 'I FEEL CONTROL' mode for cooling, including fan speed and coil protection.
Explains 'I FEEL CONTROL' mode for heating, covering fan speed and protection controls.
Details the conditions required for initiating the defrosting operation.
Outlines the conditions under which the defrosting operation stops.
Explains the control mechanism for indoor fan motor speed using rotational feedback.
Describes the protection mechanism against fan motor lock-up.
Details the operation and control of the horizontal vane.
Explains the operation and control of the vertical vane for MSH-30RV.
Provides instructions on how to set ON and OFF timers.
Explains how to cancel programmed timer settings.
Details how LEV opening is corrected based on discharge temperature differences.
Illustrates the timing and control of LEV opening during operation.
Explains how to activate compulsory defrosting mode for service.
Describes how to modify defrost interval and start/finish temperatures.
Details the automatic restart function after power failure.
Provides safety precautions and preliminary checks before troubleshooting.
Lists symptoms, indications, detection methods, and check points for troubleshooting.
Details resistance and voltage criteria for diagnosing main components.
Step-by-step guide to disassembling the indoor unit components.
Step-by-step guide to disassembling the MSH-30RV indoor unit components.
Step-by-step guide to disassembling outdoor unit components.
Lists structural components of the indoor unit with part numbers and quantities.
Lists functional and electrical parts of the indoor unit with part numbers.
Lists structural, electrical, and functional parts for the outdoor unit.
Details the air cleaning filter, its function, life, and maintenance.
Describes the deodorizing filter, its function, and cleaning instructions.
