Mitsubishi MCFH-24NV - Outdoor Unit Disassembly (MCFH-13 NV)

57
12-2. MUCFH-13NV -
OUTDOOR UNIT
E4
OPERATING PROCEDURE PHOTOS
1. Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screws of the service panel.
(3) Remove the screws of the cabinet.
(4) Remove the screws of the front panel and motor support.
(5) Remove the service panel, and remove the screw from
the insides.
(6) Remove the top panel.
(7) Remove the cabinet.
2. Removing the deicer P.C. board
(1) Remove the service panel and the cabinet.
(2) Disconnect all the connectors and the terminals on the
deicer P.C. board.
(3) Remove the deicer P.C. board.
Photo 4
Terminal
block
Screws
Deicer
P.C. board
Photo 1
Photo 3
Screws of
the top panel
Service
panel
Screws of the
service panel
Screws of the
top panel
Screws of the
cabinet
Screws of the cabinet
Photo 2
Screws of the front panel
and motor support
Screws
of the
cabinet
Screw
Relay panel
OB267--2.qxp 01.4.13 1:01 PM Page 57