I
Introduction
Thank you for purchasing the Mitsubishi CNC.
This instruction manual describes the handling and caution points for using this CNC.
Incorrect handling may lead to unforeseen accidents, so always read this instruction
manual thoroughly to ensure correct usage.
Make sure that this instruction manual is delivered to the end user.
Precautions for safety
Please read this instruction manual and auxiliary documents before starting
installation, operation, maintenance or inspection to ensure correct usage.
Thoroughly understand the device, safety information and precautions before starting
operation.
The safety precautions in this instruction manual are ranked as "DANGER" and
"CAUTION".
DANGER
When a dangerous situation may occur if handling is
mistaken
leading to fatal or major injuries.
CAUTION
When a dangerous situation may occur if handling is
mistaken
leading to medium or minor injuries, or physical damage.
Note that some items described as CAUTION may lead to major results
depending on the situation. In any case, important information that must be
observed is described.
The signs indicating prohibited and mandatory items are described below.
This sign indicates that the item is prohibited (must not be
carried out). For example, is used to indicate "Fire
Prohibited".
This sign indicates that the item is mandatory (must be carried
out). For example, is used to indicate grounding.
After reading this instruction manual, keep it in a safe place for future reference.
POINT
In this manual, this mark indicates important matters the operator
should be aware of when using the CNC.
To Next Page
Loading...
Need help?
General
