Need help?Do you have a question about the Mitsubishi MELSEC A1SY42 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Rated Load Voltage | 24 V DC |
| Product Name | MELSEC |
| Type | Output Module |
| Rated Load Current | 0.1A per point |
| Maximum Load Current | 2 A |
| OFF Leakage Current | 0.1mA |
| ON Voltage Drop | 1.5 V |
| Output Type | Transistor (Sink) |
| External Wiring Connection Method | Connector |
| Weight | 0.2kg |
Provides a flowchart to guide the selection of appropriate input modules based on specifications.
Offers a flowchart for selecting output modules based on type, voltage, and current ratings.
Guides users through selecting special function modules based on application requirements.
Details the selection process for power supply modules, including notes on current consumption.
Explains how to choose the correct base unit based on the number of required I/O slots and current.
Guides on safely installing and removing AIS modules from the base unit.
Provides wiring guidelines for power supply modules, including transformer usage.
Gives wiring instructions for I/O equipment, including cable size, separation, and grounding.
Explains proper grounding procedures for the PLC, including independent and joint grounding methods.
Explains contact instructions: LD, LDI, AND, ANI for operation start and series connection.
Details ladder block series (ANB) and parallel (ORB) connection instructions.
Explains MPS, MRD, and MPP instructions for managing operation results.
Details OUT instructions for bit devices, timers, and counters.
Describes SET and RST instructions for setting and resetting bit devices.
Explains PLS and PLF instructions for generating single-scan pulses.
Details the CHK instruction for reversing bit device output status.
Explains SFT and SFTP instructions for shifting bit device status.
Describes MC and MCR instructions for controlling program execution blocks.
To Next Page