15
Pour the
water out
as shown.
Removing Water from the Tank
The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 4L) is full.
Empty the tank.
1 Remove the water tank.
2 Remove the tank lid, and empty.
Floating element
Do not remove or dismantle
the float.
Note
Grasp handle and
slide out.
Open the front door.
Do not remove or dismantle the floating element
in the tank. If it is removed, the unit cannot detect
when the tank is full, and this could result in
leakage.
<Hold the tank
this way>
Tank lid
3 Reattach the tank lid and replace
the water tank.
Confirm that the
lid is securely
attached to the
water tank, and
push the tank in.
Close the front
door.
¡ If the lid is not properly closed, you
may have problems removing the tank.
¡ If the tank is not installed correctly, the
tank full light will come on, and the unit
will not operate.
To Next Page
Loading...
Need help?
General
