EasyManua.ls Logo

Mitsubishi MR-BX52W-N-P - Continued Ice Making Instructions; Long-Term Ice Making Stoppage

Mitsubishi MR-BX52W-N-P
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
Wash the water tank, water supply pipe and ice tray before making ice for the fi rst time, or
if you have not made ice for more than a week. Odors or dust may adhere to the parts.
Before Use Operation Cleaning TroubleshootingOperation
19
Hold with
both hands
Water tank
Return the water tank to its original position
Hold horizontally
with both hands
Ice
storage
box
Stop ice making and empty the water from the ice tray and water tank if not making ice for a long time.
Water tank
Return the water tank
to its original position
3
Remove the water tank.
1
Set to or for the ice
making compartment.
Page 18
5
Close the water tank cap, and push it in
until it makes contact with the inner side.
Check that there are no foreign objects between the tank
holder and the water supply pipe area. It may cause freezing.
Page 28
Push in the water tank until it makes contact with the
inner side. Setting the water tank incorrectly may prevent
ice from forming.
Full position
Water supply
port
4
Slide open the water
tank cap
and pour water
into the water supply port
up to the full position.
If the tank is fi lled beyond the full
position, water may spill out when you
carry or tilt it. Further, this may cause the
water channels in the ice tray to freeze, or cause
the ice to join together or form a protrusion.
WARNING-Fill with potable water only.
2
Make sure that on the
operation panel is not on.
If the lamp is on, insert the ice tray and lock the
ice tray lock lever.
Page 28
2
Remove the water tank and
empty the water.
3
Remove the ice tray and empty
the water and ice.
For details on removal, see the page that describes
the cleaning methods.
Page 28
4
Remove the ice storage
box and empty the
water and ice.
Do not dispose of the
soundproof mat.
5
Wash the water tank (water supply
pump, tank pipe, optical catalyst and
lead-cleaning fi lter), water supply
pipe, ice storage box, soundproof
mat, ice tray and ice server, dry them
completely, and then return them to
their original positions.
Pages 28-29
If the water tank is not
returned to its original
position, the food
inside the refrigerator
compartment may freeze.
If you will not make ice for a long time
1
Set the ice making setting of the
ice making compartment to
.
Page 18
Making ice

Related product manuals