EasyManua.ls Logo

Mitsubishi MR-BX52W-N-P - Making Ice; Setting the Ice Making Compartment; About Ice Cubes and Quick Ice Making; Ice Tray Precautions

Mitsubishi MR-BX52W-N-P
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display
of setting
Settings Application
Approximate ice
making time
Regular ice making
When you want to make ice About 2 hours
Quick ice making
When you want to make ice quickly 60 to 80 minutes
Stop ice making
When you want to clean the ice making
compartment
*1
Ice tray precautions
The ice cube size and the number of ice cubes
in one batch depends on various factors, such
as the amount of water in the water tank.
About 10 to 12 ice cubes can be made each time.
If the ice is stored in the ice
storage box for a long time, the
ice cubes may join together or
shrink (due to a phenomenon
called sublimation).
If you try to crush ice that has joined together,
be careful not to injure your hands.
In the following cases, quick ice making is stopped
automatically.
When the ice storage box is full (about 80 to 140 ice cubes)
• When there is no water in the water tank
When about 10 hours have passed in quick ice making mode
(The display changes from to
)
The sound of the refrigerator running gets louder during quick
ice making, because the refrigerator is operating at high speed.
It may take more than 24 hours to make ice immediately after
installation, even in quick ice making mode.
When quick ice making is performed, the ice may split or crack
because the freezing is performed quickly.
About the ice About quick ice making
The
display lights up when the ice tray or ice tray lock lever is not installed correctly. (How to install ice tray:
Page 28
)
Before making ice, install the ice tray and lock the ice lock lever, making sure that
is off.
When
of the compartment display is blinking, the ice tray is operating.
If you unlock the ice tray lock lever while the ice tray is operating, you will be alerted by a repetitive buzzer.
Do not remove the ice tray while it is operating. It may cause injury or failure.
Before Use Operation Cleaning TroubleshootingOperation
18
1
Press to light up .
2
Press to select the ice making setting.
The display changes in the following order each time the button is pressed.
is displayed at the time of purchase.
The ice making time is the approximate time for a single batch (10 to 12 ice cubes).
In addition to the surrounding temperature, water type, and water volume and temperature in the water
tank, ice making times may vary with the following conditions, and be longer than those described above.
When the ambient temperature is low, such as during winter
When the doors are frequently opened and closed
When the freezer compartment is set to low
When the refrigerator is set to ECO MODE
Page 20
• When the ice tray is pulled out and reinserted during ice making
If
is displayed, ice cannot be made. Cancel the setting.
Page 22
* Display example
Press the button.
Light up the displays on the operation panel. (Press .)
*1:
For short term storage of frozen food. Not to be used for long term storage of frozen food or ice cream.
Set the ice making compartment
Making Ice
The set
display
lights up.

Related product manuals