Mitsubishi MT160 - Page 146

FRONT AXLE & STEERING LINKAGE SYSTEM
~0.02 in (0.5mm)
(6) Install the washer to the right-side king-
pin, tighten the castle
nut, and lock with
the cotter pin.
Tightening
torque
4.5 ~ 5.5 kg-m
(32.5
~ 39.7 ft-Ib)
(7) Make sure
the kingpins operate smoothly,
and grease them as required.
4-22
0.02 in (0.5mm) or loss
King pin