Do you have a question about the Mitsubishi MUZ-EF25VE and is the answer not in the manual?
Category | Air Conditioner |
---|---|
Type | Wall Mounted |
Cooling Capacity | 2.5 kW |
Heating Capacity | 3.2 kW |
Power Supply | 220-240 V, 50 Hz |
Outdoor Unit Dimensions (HxWxD) | 550 x 800 x 285 mm |
Refrigerant | R32 |
Energy Efficiency Class (Cooling) | A+++ |
Energy Efficiency Class (Heating) | A++ |
Sound Level (Indoor) | 19 dB |
Operating Temperature Range (Cooling) | -10 to 46°C |
Operating Temperature Range (Heating) | -15 to 24°C |
Presents cooling capacity and input data for various models and conditions.
Shows how compressor operational frequency affects capacity and input correction factors.
Details the procedure for operating the unit at a fixed frequency.
Displays charts for outdoor low pressure and unit current under cooling operation.
Explains the control logic for the outdoor fan motor linked to compressor operation.
Describes the control operation for the reversing valve coil in cooling and heating modes.
Illustrates the interaction between sensors and actuators for unit control.
Provides instructions for adjusting the defrost finish temperature setting.
Explains the pre-heat control function to prevent compressor start-up issues.
Lists important precautions and checks before starting troubleshooting.
Details the procedure for recalling and diagnosing past failure modes.
A table listing outdoor unit failure modes, LED indications, conditions, and remedies.
A table outlining symptoms, LED indications, abnormal points, conditions, and remedies.
Specifies resistance criteria for main parts to diagnose malfunctions.
Provides step-by-step diagnostic flowcharts for various troubleshooting scenarios.
Illustrates test points and voltage measurements on the inverter P.C. board.
Step-by-step instructions for disassembling the cabinet and components for specific models.
Detailed steps for disassembling the cabinet and components for the MUZ-EF50VE model.