Mitsubishi MXZ-4C36NAHZ - Page 152

152
OPERATING PROCEDURE
Reactor
Electrical parts box
Figure 4
Screws
for
reactor
Connectors of
reactor
15. Removing the reactor (DCL)
(1) Remove the service panel. (See Figure 1)
(2) Remove the top panel. (See Figure 1)
(3) Remove the electrical parts box (See photo 4)
(4) Remove 4 screws for reactor (4 x 10) to remove the reac-
tor. (See Figure 4)
Bottom plate of
electrical parts
box
ILLUSTRATION
OCH573C