Mitsubishi Outlander 2019

13
CENTER CONSOLE & PANEL
The drive mode can be switched by pressing the drive mode
button while the ignition switch is in the ON position.
PRESSING THE BUTTON WILL CHANGE THE DRIVE MODE IN
ORDER TO:
4WD: 4WD ECO, 4WD AUTO, 4WD LOCK
S-AWC: AWC ECO, NORMAL, SNOW, LOCK
DRIVE MODE SELECTOR (IF EQUIPPED) ELECTRICAL PARKING BRAKE (IF EQUIPPED)
Pull up on switch to engage the
parking brake.
Push down on switch to disengage
parking brake.
When the accelerator pedal is
depressed, the parking brakes are
automatically released.
The Auto Hold feature is used
to hold the vehicle stationary by
pressing the momentary-contact
AUTO HOLD switch prior to releasing
the brake pedal.
DUAL-ZONE AUTOMATIC CLIMATE CONTROLS
A
- Push to select the desired temperature
B
- Push to select outside air (Indicator light off) or recirculated air
(Indicator light on)
C
- Push for air conditioning ON/OFF
D
- Push to select the blower speed
E
- Push to select the position of air flowing from the vents
F
- Push to defog windshield
G
- When the AUTO switch is pushed, the settings are
automatically controlled. Passenger’s side temperature will be
changed to the same temperature set as the driver’s side
H
- Push to defog the rear windows and to activate the De-Icer
Controls (if equipped)
A A
C
FB
D
G
E
H