10
INSTRUMENT PANEL
You can deactivate the system by pressing down the
“ASC OFF” switch for 3 seconds or longer. When the
ASC is deactivated, the display/indicator will turn on.
To reactivate the ASC, momentarily press the “ASC
OFF” switch; the display/indicator is turned off.
When you press the LDW switch located on the left
side of the steering column, the “LDW” indicator on
the information screen of the
Multi-information Display turns OFF and the LDW
system is inactive.
Press the switch again, the system will activate.
Every time the operation mode is turned to “ON”, the
FCM will automatically be turned on.
To turn off the FCM, press and hold the FCM switch
located on the left side of the steering column. The
“FCM OFF” message and indicator will appear in the
Multi-information Display.
To change the warning distance mode, briefly press
the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid only
and is not a substitute for safe and careful driving. Under certain
circumstances, the system may not detect other vehicles and/or
pedestrians correctly.
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH
LANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED)
FORWARD COLLISION MITIGATION (FCM) SWITCH (IF EQUIPPED)
ECO MODE SWITCH
ECO MODE is an eco-driving support system which
automatically controls the engine, air conditioning system,
4WD system (if equipped) and S-AWC (if equipped) to improve
fuel efficiency.
To activate, press the ECO MODE switch.
ECO DRIVE ASSIST
This function displays how fuel-efficiently you are driving
under different driving conditions. To show, press the Multi-
information Display switch. The ECO drive assist is displayed
only when the vehicle is driven with the selector lever in the “D”
(DRIVE) position or when the vehicle is driven in the sport mode
(for vehicles equipped with sportronic steering wheel
paddle shifter).
To Next Page
Loading...
Need help?
General
