Mitsubishi Outlander 2019

15
USB AND IPOD
®
INPUT
1. Park your vehicle in a safe place and turn the ignition
switch to the “OFF” position or put the Operation Mode
in OFF.
2. Plug in the USB connecting cable that is supplied with your
device and connect the USB end into the USB port located
in the lower instrument panel.
3. Turn the ignition switch or the Operation Mode to the “ACC”
position. Turn on the audio system.
4. Press AUDIO to switch to the USB mode.
5. Depending on your USB device, it may take longer for
playback to start.
6. Once the device is selected, playback starts.
CENTER CONSOLE & PANEL
A
- Power and Volume Knob
B
- Touch Screen Display
C
- Home (return to initial display)
D
- Apps
E
- Audio
F
- Menu
SMARTPHONE LINK DISPLAY AUDIO (SDA) (IF EQUIPPED)
A
B
C
D
E
F
Make sure you are on the Home Screen and touch either FM or the
AM button.
1. Once the station you want to save is shown on the screen,
touch and hold the preset boxes on the touch screen until you
hear a beep.
2. Once you hear a beep, the station will be saved to memory.
The clock adjustment procedure is as follows:
1. Press the HOME key
2. Touch SETTING, then CLOCK
The display changes to the clock setting where time and
format can be adjusted.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting change is completed
ACCESSING AM OR FM STATIONS
TO SET A STATION IN MEMORY
SETTING THE CLOCK
iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.