EasyManua.ls Logo

Mitsubishi Outlander PHEV 2019

Mitsubishi Outlander PHEV 2019
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
INSTRUMENT PANEL
Due to the sealed fuel tank, pressure may build within the
tank in high altitudes, high temperatures, or if it has not been
used in some time. After pressing the fuel release switch, the
fuel tank will automatically reduce pressure as needed before
opening the tank. This may take a couple of seconds or up to a
minute, and a message will display.
FUEL TANK FILLER DOOR OPENER SWITCH
PLEASE WAIT
NOW OPENING
You can deactivate the system by pressing
down the ASC OFF” switch for 3 seconds
or longer. When the ASC is deactivated, the
display/indicator will turn on.
To reactivate the ASC, momentarily press
the ASC OFF” switch; the display/indicator is
turned off.
When you press the LDW switch located on
the left side of the steering column, the “LDW”
indicator on the information screen of the
Multi-information Display turns OFF and the
LDW system is inactive.
Press the switch again, the system
will activate.
Every time the operation mode is turned to
“ON”, the FCM will automatically be turned on.
To turn off the FCM, press and hold the FCM
switch located on the left side of the steering
column. The “FCM OFF” message and indicator
will appear in the Multi-information Display.
To change the warning distance mode, briefly
press the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid
only and is not a substitute for safe and careful driving. Under
certain circumstances, the system may not detect other
vehicles and/or pedestrians correctly.
ACTIVE STABILITY CONTROL (ASC) OFF SWITCHLANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED)
FORWARD COLLISION MITIGATION (FCM) SWITCH
(IF EQUIPPED)

Other manuals for Mitsubishi Outlander PHEV 2019

Related product manuals