19
1. When folding the left side second row seat, store the seat
belt for the middle seating position of the second row
seat. Refer to “Detachable center seat belt for second row”
in your Owner’s Manual for help.
2. Lower the head restraint for
second row middle seating
position to its lowest position.
3. Pull the strap (A) and tilt
forward the head restraints
for second row outside
seating position.
4. Pull the strap (B) to flip the seat
cushion forward.
5. Fold forward the seat belt buckle.
6. Pull up the
lever (D),
then fold
the seatback
forward.
1. Raise the seatback until it locks securely
into place.
2. While lifting the seat belt buckle (A),
gently lower the seat cushion. Make sure
that there
is a hook (B) at the position shown in
the illustration.
3. Push down the seat cushion until it locks
securely into place.
4. Make sure that all seat belt buckles are
properly positioned on the seat cushion.
5. If the center seat belt is stored:
• Pull out the detachable anchor plate
(D) from the seatback.
• Pull the small latch plate (E) slowly and
insert it into the detachable anchor
plate until a click is heard.
• Make sure that the seat belt is not
twisted.
UNFOLDING THE SECOND ROW SEATSFOLDING THE SECOND ROW SEATS
CAUTION: Do not allow any person to sit on the flipped seat
cushion, and do not place luggage on it. The seat’s mounting
fittings could bend under the weight, making it impossible
for the seat cushion to be secured when it returns to the
original position.
THE SECOND ROW SEATS
To Next Page
Loading...
