Mitsubishi Outlander PHEV 2019

13
FLOOR CONSOLE & PANEL
SHIFT LEVER AND CONSOLE DESIGN
Pressing the PARK switch
A
with your foot on the
brake will place the vehicle in Park.
To change S-AWC mode, press the TWIN MOTOR 4WD
LOCK
B
. This will put the vehicle into NORMAL or AWD
LOCK mode. Either mode can be driven on any surface
at any speed.
Pressing the Charge switch
C
, engages the engine
which in turn, will charge the battery.
The PHEV has a unique shift pattern
D
that includes
Brake Regeneration. Moving the shifter to the right
(B - Mode) and pressing down can move brake
regeneration to either regeneration level 3 or 5.
Pressing the SAVE switch
E
will preserve the
battery charge by periodically engaging the engine
as needed.
Pressing the EV Priority MODE switch
F
helps to
keep the vehicle in the electric mode. See the Owner's
Manual for instances where it will not stay in the
EV mode.
The Electric Parking Brake
G
can be engaged by
lifting the Parking button and disengaged by pressing
the parking switch. The Auto Hold switch
H
will
help to keep the vehicle in a stopped position when
coming to a stop. The brake will release when the
accelerator is pressed.
A
- Push Button Park (behind lever)
B
- Twin Motor 4WD Lock
C
- Battery Charge Switch
D
- Transmission Selector with Brake
Regeneration Selectt
E
- Battery Save Switch
F
- EV Priority Mode
G
- Electric Parking Brake
H
- Auto Hold Switch
A
B
C D E
F
G
H