15
A
- Power and Volume Knob
B
- Touch Screen Display
C
- Home (return to initial display)
RADIO
Make sure you are on the Home Screen and touch either FM or
the AM button.
1. Once the station you want to save is shown on the screen, touch
and hold the preset boxes, numbered 1 through 6, on the touch
screen until you hear a beep.
2. Once you hear a beep, the station will be saved to memory.
The clock adjustment procedure is as follows:
1. Touch the HOME key
2. Touch SETTING, then CLOCK
The display changes to the clock setting where time and format
can be adjusted.
3. Touch SET
4. To return to the settings, touch BACK
5. The time setting change is completed
ACCESSING AM OR FM STATIONS
TO SET A STATION IN MEMORY
SETTING THE CLOCK
USB INPUT
1. Park your vehicle in a safe place
and press the Power switch off.
2. Plug in the USB connecting cable
that is supplied with your device
and connect the USB end into the
input terminal located in the floor
console box.
3. Press the Power switch to ON or
to the "ACC" mode. Turn on the
audio system.
4. Touch AUDIO to switch to the USB mode.
5. Depending on your USB device, it may take longer for playback
to start.
6. Once the device is selected, playback starts.
D
- Apps
E
- Audio
F
- Menu
E
C
B
F
A
D
FLOOR CONSOLE & PANEL
To Next Page
Loading...
