Mitsubishi Outlander PHEV 2019

6
STEERING WHEEL CONTROLS
SEEK
Change station or track
SOURCE
Change the audio source
VOLUME UP/DOWN
AUDIO REMOTE CONTROL SWITCH
A
- CANCEL: Used to deactivate the set
speed driving.
B
- RES + : Used to increase the set speed
and to return to the original set speed.
C
- SET – : Used to reduce the set speed
and to set the desired speed.
D
- ON/OFF: Used to turn on and off the
cruise control.
E
- ACC DISTANCE SWITCH: Used to set
or change the following distance
between your vehicle and the vehicle
in front of you.
CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
B
C
D
E
A
TO SET A CRUISING SPEED
1. Press
D
and the “ACC” (if equipped) or “CRUISE” indicators will
appear in the Multi-information Display.
2. Accelerate or decelerate to your desired speed (above 25 mph).
Press
C
and remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
1. Push up
B
to increase set cruising speed.
2. Push down
C
to decrease set cruising speed.
TO CANCEL THE CRUISING SPEED
1. Press
A
or press the brake pedal, or press
D
.
Press the rectangular icon next to the "Source" button on
the steering wheel to engage the camera at speeds up to 5
MPH. The camera will automatically engage when the vehicle
is shifted into reverse. Cameras placed at four positions
around the vehicle provide visibility that would normally not be
seen. The Audio Display will show two images of the vehicle's
immediate surroundings.
MULTI-VIEW CAMERA (IF EQUIPPED)