© Mitsubishi Forklift Trucks 2013. All
© Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
13 (244)13 (244)
PBV20N2 PBV20N2 Service Service ManualManual
•
• To avoid back injury, use a To avoid back injury, use a hoist when lifting components weighinhoist when lifting components weighing 23 kg g 23 kg (51 lb) or(51 lb) or
more. Make sure all chains, hooks, slings, etc., more. Make sure all chains, hooks, slings, etc., are in good condition and of theare in good condition and of the
correct capacity. Make sure all hooks are correct capacity. Make sure all hooks are positioned correctly. Lifting eyes are notpositioned correctly. Lifting eyes are not
to be side-loaded during a lifting operation.to be side-loaded during a lifting operation.
•• Make sure all Make sure all protective devices including guards and shields are protective devices including guards and shields are properly installedproperly installed
and functioning correctly before starting a repair. If a and functioning correctly before starting a repair. If a guard or shield must beguard or shield must be
removed to perform the repair work, use removed to perform the repair work, use extra caution.extra caution.
•
• Always suppoAlways support the mast and rt the mast and carriage to keep carriage to keep the carriage othe carriage or attachments rar attachments raisedised
when performing maintenance or repair work that requires the mast to be in thewhen performing maintenance or repair work that requires the mast to be in the
raised position.raised position.
3.23.2
Personal safetyPersonal safety
•
•
Remove all rings, watches and other pieces of metal jewellery before you Remove all rings, watches and other pieces of metal jewellery before you startstart
working on the truck. If working on the truck. If a metal object gets into contact with a metal object gets into contact with an electricallyan electrically
conductive part, it may cause a short circuit or a serious burn.conductive part, it may cause a short circuit or a serious burn.
•
• Always wear proteAlways wear protective glasses active glasses and protective shnd protective shoes when wooes when working around rking around trucks.trucks.
In particular, wear protective glasses when using a hammer or In particular, wear protective glasses when using a hammer or sledge on any part ofsledge on any part of
the truck or the truck or its attachments. Use welder’s gloves, hood/gogglits attachments. Use welder’s gloves, hood/goggles, apron and otheres, apron and other
protective clothing appropriate to the welding job protective clothing appropriate to the welding job being performed. Do not wearbeing performed. Do not wear
loose fitting or torn clothing.loose fitting or torn clothing.
3.33.3
Work safetyWork safety
•
• UnauthorizeUnauthorized truck modification is not d truck modification is not permitted. No modifications or alterations to apermitted. No modifications or alterations to a
powered industrial truck, which could affect, for example, capacity, stability or safetypowered industrial truck, which could affect, for example, capacity, stability or safety
requiremenrequirements of the ts of the truck, shall be made without the truck, shall be made without the prior written approval of theprior written approval of the
original truck manufacturer, its authorized representative, or a original truck manufacturer, its authorized representative, or a successor thereof.successor thereof.
This includes changes affecting, for example, braking, steering, visibility This includes changes affecting, for example, braking, steering, visibility and theand the
addition of removable attachments. When the manufacturer or his addition of removable attachments. When the manufacturer or his successorsuccessor
approves a modification or alteration, the approves a modification or alteration, the manufacturemanufacturer or r or successor shall alsosuccessor shall also
make and approve appropriate changes to the capacity plate, decals, tags andmake and approve appropriate changes to the capacity plate, decals, tags and
operation and maintenance handbooks.operation and maintenance handbooks.
Only in the event that the Only in the event that the truck manufacturer is no longer in business and there istruck manufacturer is no longer in business and there is
no successor in the interest to no successor in the interest to the business, may the user arrange for a the business, may the user arrange for a modificatiomodificationn
or alteration to a powered industrial truck, provided, however, that the or alteration to a powered industrial truck, provided, however, that the user:user:
a. a. arranges arranges for for the the modification modification or or alteration alteration to to be be designed, designed, tested tested andand
implementeimplemented by an engineer(s) expert in industrial trucks d by an engineer(s) expert in industrial trucks and their safety,and their safety,
b. b. maintains maintains a a permanent permanent record record of of the the design, design, test(stest(s) ) and and implementation implementation of of thethe
modification or alteration,modification or alteration,
c. c. approves approves and and makes makes appropriate appropriate changes changes to to the the capacity capacity plate(s), plate(s), decals,decals,
tags and instruction handbook, andtags and instruction handbook, and
To Next Page
Loading...
Need help?
General
