Mitsubishi PBV20N2 - Page 146

© Mitsubishi Forklift Trucks 2013. All © Mitsubishi Forklift Trucks 2013. All rights reserved.rights reserved. Revision: BRevision: B
Document ID: 615023Document ID: 615023
145 (244)145 (244)



PBV20N2 PBV20N2 Service Service ManualManual
PARAMETER DESCRIPTION
PARAMETER DESCRIPTION
Braking smootheningBraking smoothening
BRK SMOOTHBRK SMOOTH
This parameter controls the smoothness of theThis parameter controls the smoothness of the
braking ramp.braking ramp.
Value range:Value range:
•
•
 1: Minimum1: Minimum
•
•
 5: Maximum5: Maximum
Deceleration rampDeceleration ramp
DECEL. BRAKINGDECEL. BRAKING
This parameter controls the deceleration rate whenThis parameter controls the deceleration rate when
the speed is reduced but not the speed is reduced but not stopped while movingstopped while moving
in the standard drive mode.in the standard drive mode.
Value range:Value range:
•
• 0.1: Fastest0.1: Fastest
•
• 10: Slowest10: Slowest
ECO: Acceleration rampECO: Acceleration ramp
ACCELER. DELAACCELER. DELAY EY E
This parameter determines the acceleration rate ofThis parameter determines the acceleration rate of
the traction motor in the the traction motor in the economy drive mode.economy drive mode.
Value range:Value range:
•
•
 0.1: Fastest0.1: Fastest
•
•
 10: Slowest10: Slowest
ECO: Deceleration rampECO: Deceleration ramp
DECEL. BRAKING EDECEL. BRAKING E
This parameter controls the deceleration rate whenThis parameter controls the deceleration rate when
the speed is reduced but not the speed is reduced but not stopped while movingstopped while moving
in the economy drive mode.in the economy drive mode.
Value range:Value range:
••
 0.1: Fastest0.1: Fastest
•
•
 10: Slowest10: Slowest
ECO: Inversion braking rampECO: Inversion braking ramp
INVERS. BRAK. EINVERS. BRAK. E
This parameter controls the deceleration rate whenThis parameter controls the deceleration rate when
the direction switch is reversed while moving in thethe direction switch is reversed while moving in the
economy drive mode.economy drive mode.
Value range:Value range:
•
•
 0.1: Fastest0.1: Fastest
•
•
 10: Slowest10: Slowest
ECO: Maximum speed forwardECO: Maximum speed forward
MAX SPEED FORW EMAX SPEED FORW E
This parameter controls the maximum speedThis parameter controls the maximum speed
forward in the economy drive mode.forward in the economy drive mode.
Value range:Value range:
•• 10%: Slowest10%: Slowest
•
• 100%: Fastest100%: Fastest
NOTE:NOTE:For safety reasons, do not exceed theFor safety reasons, do not exceed the
parameter table value!parameter table value!
ECO: Maximum speed reverseECO: Maximum speed reverse
MAX SPEED BACK EMAX SPEED BACK E
This parameter controls the maximum speedThis parameter controls the maximum speed
backward in the economy drive backward in the economy drive mode.mode.
Value range:Value range:
•
• 10%: Slowest10%: Slowest
•• 100%: Fastest100%: Fastest
NOTE:NOTE:For safety reasons, do not exceed theFor safety reasons, do not exceed the
parameter table value!parameter table value!
https://www.forkliftpdfmanuals.com/