PBV20N2 PBV20N2 Service Service ManualManual
15.515.5 Voltage converterVoltage converter
Figure 95. Voltage converter overviewFigure 95. Voltage converter overview
The voltage converter (12 V, 12.5 A) The voltage converter (12 V, 12.5 A) allows multiple peripherals, such as a PC, aallows multiple peripherals, such as a PC, a
barcode scanner or a label printer, to barcode scanner or a label printer, to be connected to the truck's electrical system.be connected to the truck's electrical system.
15.5.1 15.5.1 Installation Installation of of the the voltage voltage converterconverter
CAUTIONCAUTION
Always use the correct schematic diagram for the Always use the correct schematic diagram for the specific model you are servicing. Thespecific model you are servicing. The
latest schematic diagrams are available from the manufacturer’s Web site.latest schematic diagrams are available from the manufacturer’s Web site.
1.1. Screw the voltage converter’sScrew the voltage converter’s
mounting plate into the truck framemounting plate into the truck frame
above the horn.above the horn.
2.2. Screw the voltage converter onto theScrew the voltage converter onto the
mounting plate.mounting plate.
3.3. Connect the voltage converter wiresConnect the voltage converter wires
according to the truck model specificaccording to the truck model specific
schematic diagram. Seeschematic diagram. SeeFigure 96Figure 96
below.below.
To Next Page
Loading...
