What to do if Mitsubishi Air Conditioner remote displays an error code?
If your Mitsubishi Air Conditioner remote controller displays an error code, it indicates that the self-diagnostic function is running to preserve the unit. Do not attempt to make repairs yourself. Turn the main switch off and contact the dealer from whom you bought the air conditioner, providing the unit name and the information displayed on the remote controller.
Why Mitsubishi PEA-RP.EA stops before reaching set temperature?
If your Mitsubishi Air Conditioner stops operating before reaching the set temperature in heating mode, it may be due to frost forming when the outdoor temperature is low and humidity is high. Wait about 10 minutes for the frost to melt.
Why Mitsubishi PEA-RP.EA won't start/stop after restarting?
If the start and stop functions are unavailable just after restarting your Mitsubishi Air Conditioner, wait about three minutes. The operation has stopped to prevent damage to the air conditioner.
Why Mitsubishi Air Conditioner remote indicators don't light up?
If the indicators on your Mitsubishi Air Conditioner remote controller do not light up when operated, turn on the power switch. “ · ” will be displayed.
What to do if Mitsubishi PEA-RP.EA switches aren't working?
If the switches on your Mitsubishi Air Conditioner are not working properly, contact your local dealer for service.
What to do if something fell inside Mitsubishi PEA-RP.EA?
If something is accidentally dropped into your Mitsubishi Air Conditioner, contact your local dealer for service.
What does 'CENTRALLY CONTROLLED' mean on Mitsubishi PEA-RP.EA remote?
If 'CENTRALLY CONTROLLED' is displayed on your Mitsubishi Air Conditioner remote controller, the start and stop functions of the remote controller are not available.
Why is white mist coming from my Mitsubishi PEA-RP.EA Air Conditioner?
A white mist expelled from the indoor unit of your Mitsubishi Air Conditioner may occur just after the unit is turned on when a high level of humidity is present in the room.
What does 'H0' mean on my Mitsubishi PEA-RP.EA remote?
If “H0” is displayed on your Mitsubishi Air Conditioner remote controller, an automatic startup test is being performed, which will last for about two minutes.
General| Brand | Mitsubishi |
|---|---|
| Model | PEA-RP.EA |
| Category | Air Conditioner |
| Language | English |
Explains symbols like Warning and Caution for user safety and unit protection.
Details symbols indicating actions to avoid, follow, grounding, rotating parts, servicing, and electrical/heat hazards.
Stresses that installation must be done by authorized dealers to prevent risks like leakage, shock, or fire.
Warns against using sharp objects on the remote controller to avoid damage.
Instructions on how to turn the air conditioner on and off using the remote controller.
Guide on selecting different operating modes like Cooling, Fan, Heating, Drying, and Automatic.
How to adjust the desired temperature for cooling, heating, drying, and automatic modes.
Steps to select fan speed (Low, High) and notes on automatic fan speed adjustments.
Instructions on setting the current time and programming the timer for unit start and stop operations.
Detailed steps for cleaning air filters using vacuuming or washing, with cautions.
Emphasizes powering off the unit before cleaning to ensure safety.
Addresses common problems like poor cooling/heating and unit stopping before set temperature.
Solutions for remote controller indicators not lighting up or 'CENTRALLY CONTROLLED' messages.
Lists the acceptable indoor and outdoor operating temperature ranges for cooling and heating.
Clarifies normal operating sounds and messages that do not signify a problem.
Technical specifications for PEA-RP-EA + PUHZ-RP-VHA models, including capacity, power, dimensions, airflow, and weight.
Technical specifications for PUHZ-RP-VHA models, including power source, dimensions, airflow, and weight.
To Next Page