Mitsubishi Q03UD(E)CPU User Manual

3 - 28
3.3 Settings for Creation and Execution of Multiple Sequence Programs
3
SEQUENCE PROGRAM CONFIGURATION AND
EXECUTION CONDITIONS
(3) Program storage location
The programs executed by the CPU module can be stored into the following
memories.
• Program memory
• Standard ROM
•Memory card
(4) Available execution types
The following program execution types can be set on the CPU module.
• Initial execution type program Section 3.3.1
• Scan execution type program Section 3.3.2
• Low speed execution type program Section 3.3.3
Note3.18
Note17
• Stand-by type program Section 3.3.4
• Fixed scan execution type program Section 3.3.5
Note17
Redundant
Universal
UD
Note3.18 Note3.18
The low speed execution type programs are not available for the Redundant CPU or Universal
model QCPU.
Redundant
Universal
UD
Note3.18 Note3.18

Mitsubishi Q03UD(E)CPU Specifications

General

Brand	Mitsubishi
Model	Q03UD(E)CPU
Category	Controller
Language	English