Mitsubishi SRK10CFV-4; SRK13CFV-4 - 4.2 Unit ON;OFF button

-
10
-
Unit indication selection
Models SRK10CFV-4, 13CFV-4
Models SRK10CFV, 13CFV
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
RUN light (green)
Illuminates during operation
and CLEAN operation.
TIMER light (yellow)
Illuminates during TIMER operation.
ECONO light (orange)
Illuminates during ECONOMY operation.
RUN light (green)
Illuminates during operation
and CLEAN operation.
TIMER light (yellow)
Illuminates during TIMER operation.
RUN TIMER
ON / OFF
HI POWER 3D AUTO
RUN TIMER
ON / OFF
HI POWER ECONO
HI POWER light (green)
Illuminates during HIGH POWER operation.
Unit ON/OFF button
4.2 Unit ON/OFF button
When the remote control batteries become weak, or if the remote control is lost or malfunctioning, this button may be used to turn the
unit on and off.
(1) Operation
Push the button once to place the unit in the automatic mode. Push it once more to turn the unit off.
(2) Details of operation
The unit will go into the automatic mode in which it automatically determines, from room temperature (as detected by sensor),
whether to go into the cooling or thermal dry modes.
Function
Room temperature
Operation mode
setting
Fan speed Flap
Timer switch
Cooling About 24ºC
Thermal dry About 24ºC
Auto Auto Continuous