– 9 –
COOL/DRY/FAN mode operation procedure
Air flow direction adjustment procedure. Page 10
Program changing procedure
Set the new program.
• The operation program can also be set or changed when
the air-conditioner is not in operation.
Aim the remote control at the air-conditioner.
Press the MODE select button.
Move the [ mark] to the desirable operation position.
(Cool), (Fan), (Dry)
Press the ON/OFF button.
Press the TEMP button.
Press or button for the desired temperature.
Standard
4
3
To stop: Press the ON/OFF button.
• Air is not blown out during the operation.
Page 20
NOTE
2
1
Air-conditioner operating conditions
■ Use within the following operational range. Operating outside of this range may result in the protection devices being activated, preventing the
unit from working.
Cooling operation
Outside temperature Approximately 21 to 54 °C
Inside temperature Approximately 21 to 32 °C
Below approximately 80%
The long-term use of the unit with a humidity level exceeding 80% may result in condensation forming on the surface
of the indoor unit, leading to water drips.
Press the FAN SPEED button
Set the fan speed as desired.
COOL
FAN
DRY
26°C~28°C ——21°C~24°C
Inside humidity
RKW012A217_En.p65 06.8.3, 1:52 PM9
To Next Page
Loading...
Need help?
General
