– 14 –
HIGH POWER/ECONOMY operation procedure
2
If the air-conditioner is not operating, aim the remote control at the air-conditioner.
Press the ON/OFF button.
Press the HI POWER/ECONO button.
• When the operating mode is AUTO or COOL
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
• When the operating mode is DRY or PROGRAM TIMER
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
1
(
HIGH POWER
)(
ECONOMY
) (Normal operation)
(
ECONOMY
) (Normal operation)
Concerning
HIGH POWER
operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling operation for 15 minutes continuously. The
remote control
indicates but the FAN SPEED indication is erased.
• During the HIGH POWER operation, the room temperature is not
controlled. When it causes an excessive cooling, press the HI
POWER/ECONO button once more to cancel the HIGH POWER
operation.
• HIGH POWER operation is not available during the DRY and the
PROGRAM TIMER operations.
• During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
• When the following operations are conducted HIGH POWER op-
eration will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER operation
has started.
Concerning
ECONOMY
operation
Pressing the HI POWER/ECONO button intlates a soft operation with the power suppressed in order to avoid an excessive cooling. The unit
operates 1.5°C higher than the setting temperature for weak wind capacity during cooling. The remote control
indicates but the FAN SPEED
indication is eraseed.
NOTE
• It will go into ECONOMY operation the next time the air-condi-
tioner runs in the following instances.
1
When the air-conditioner is stopped using the ON/OFF button.
2
When the air-conditioner is stopped in SLEEP or OFF
TIMER operation.
3 When CLEAN operation ends.
• When the following operations are conducted ECONOMY opera-
tion will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed DRY to FAN.
NOTE
RKW012A217_En.p65 06.8.3, 1:54 PM14
To Next Page
Loading...