9
--
9 Cumulative engine operating time 1
•
Displays cumulative engine
operating time 1 for the engine
registered by the cabin controller.
•
A reset function is included.
•
Display units are hours.
C
Temperature deviation
•
This mode is used to set and
display the permissible range of
temperature deviation between the
setting temperature and the actual
room temperature.
D Log setting
• This mode is used to set
and display the log
interval, etc., used for
recording log data.
•
Displays cumulative engine
operating time 2 for the engine
registered in the cabin controller.
•
Display units are hours.
•
Displays the cumulative
operating time for the motor
registered in the cabin controller.
•
Display units are hours.
0 Cumulative engine operating time 2
A Cumulative motor operation time
•
Displays number of engine
run/stop registered in the
cabin controller.
• Display units are times.
B Number of engine run/stop
• This mode is used to set
and display the cabin
controller functions.
• Setting items display at
2-second intervals.
8
User settings
•
This mode is used to set the
refrigeration unit's automatic
STOP timer (for one stop only).
•
If a timer setting already exists,
it displays at the top of the
digital display area.
7
OFF timer
6 ON timer
•
This mode is used to set the
refrigeration unit's automatic
ON timer (for one startup only).
•
If a timer setting already exists,
it displays at the top of the
digital display area.
5 Printer output
•
This mode is used to print out the
room temperature and the setting
temperature.
•
Use of this function requires an
optional printer.
4 Defrost timer
•
This mode is used to set and
display the defrost timer.
•
The timer setting is indicated
in hour units.
3 Alarm occurrence
•
This mode indicates the currently
active alarm.
•
Up to 10 alarms display
sequentially at 2-second intervals.
2
•
This mode is used to display and
specify the setting temperature &
room temperature.
•
This display displays when the
refrigeration unit is running.
1 Clock
•
This mode is used to set and
display the current time.
•
This display displays when the
refrigeration unit is stopped.
•
This display does not display when the
clock display setting is OFF.
(3) Mode displays and functions
• Each time the [MODE] switch is pressed, the mode changes in the sequence shown below.
• Refer to the reference page number for details of each mode's settings.
• Following a mode change, the item 2 "Setting temperature / room temperature" display appears when the
[SET] switch is pressed, or after a 10-second period without a switch input.
Mode Display
Setting temperature /
room temperature
See
page 11
See
page 19
See
page 28
See
page 15
See
page 24
See
page 25
See
page 26
See
page 10
13
See
page 12
13
See
page 12
13
See
page 13
13
See
page 13
13
See
page 14
13
See
page 16
When
Stopped
During
operation
To Next Page
Loading...
Need help?
General
