25
--
Operation
(3) Setting the ON Timer
Displaying the ON Timer
1
Setting the ON Timer ON and OFF
2
Setting the ON Timer Time (hour)
5
4
6
Press the [SET] switch to register the setting. The display will change to the ON timer time (Minute) display.
Setting the ON Timer Time (minute)
7
8
3
4
•
6
•
8
2
•
3
•
5
•
7
1
ON timer ON/OFF setting display
ON timer time (Hour) setting display
ON timer time (Minute) setting display
ADVICE
ADVICE
ADVICE
•
Press the [MODE] switch (6 times when the refrigeration unit is stopped, or 5 times when running) to change the display to the ON timer display.
Press the [SET] switch to register the setting. The display will change to the ON timer display. Press
the [SET] switch again, and verify that the timer setting is indicated.
Press the [UP] or [DOWN] switch to change the display to
the ON timer ON/OFF setting display.
Press the [UP] switch to specify an ON setting at the top of the digital
display area, then press the [SET] switch to register the setting. The
display will change to the ON timer time setting display (Hour).
Specify the desired time (Hour) when operation is to begin. The displayed
"hour" value increases by 1 hour each time the [UP] switch is pressed,
and decreases by 1 hour each time the [DOWN] switch is pressed.
Specify the desired time (Minutes) when operation is to begin. The displayed
"minutes" value increases by 1 minute each time the [UP] switch is pressed,
and decreases by 1 minute each time the [DOWN] switch is pressed.
To cancel a timer setting, press the [DOWN] switch.
Press the [SET] switch to register the new time setting.
The display will change to the ON timer display.
If the [UP] or [DOWN] switch is pressed continuously,
the time value changes in a continuous manner.
If the [UP] or [DOWN] switch is pressed continuously,
the time value changes in a continuous manner.
• At motor-drive timer operations, verify that the power supply cord is plugged in.
•
As operation begins automatically when the time specified by the timer is reached, stay clear of the unit at this
time.
CAUTION
To Next Page
Loading...
Need help?
General
