Mitsubishi TUE43 User Manual

KN51057BA
19/10
INSTRUCTION MANUAL MANUEL D’INSTRUCTIONS
n
Since this engine is used being installed
on a working machine, you must
read and understand contents of the
instruction manual and caution labels of
the working machine before you use it.
n
This instruction manual provides cautions
to ensure proper and safe operations
of the engine. You are requested to
read the manual and understand its
operating methods before use. If it is used
improperly, it could result in serious
accident or injury.
n
Always keep the instruction manual
at a safe place where you can use it
whenever it may become necessary.
n
Ce moteur étant destiné à être installé sur une
machine de travail, veillez à lire et comprendre
chacune des instructions du présent manuel
et chacune des étiquettes de mise en garde
présentes sur la machine avant de l'utiliser.
n
Ce manuel d’instructions contient les mises
en garde nécessaires à une utilisation correcte
et sûre du moteur. Veillez à lire le manuel
d’instructions et à comprendre la méthode
d’utilisation du moteur avant d’utiliser la
machine. Une utilisation inappropriée peut
entraîner un grave accident ou des blessures.
n
Veillez également à conserver le manuel
d’instructions en lieu sûr an de pouvoir vous y
référer facilement en cas de besoin.
TUE Series
Série TUE
ENGLISH
FRANÇAIS

Mitsubishi TUE43 Specifications

General

Brand	Mitsubishi
Model	TUE43
Category	Engine
Language	English

Summary

FOR SAFE USE

Safety Symbol Definitions

Explains the meaning of Danger, Warning, and Caution symbols used throughout the manual.

NAMES OF COMPONENTS

INSPECTION BEFORE ENGINE OPERATION

Fuel Inspection

Checks related to gasoline type, mixing ratio, and fuel quality for engine operation.

Component Inspection Details

Detailed checks for fuel, clogging, air cleaner, screws, nuts, and fuel pipes before operation.

METHODS OF STARTING AND STOPPING THE ENGINE

Starting the Engine

Step-by-step guide for initiating engine operation, including choke and throttle adjustments.

Engine Warm-up Operation

Procedure for gradually increasing engine speed after starting to ensure proper lubrication.

Stopping the Engine

Instructions for safely shutting down the engine, including throttle and switch operations.

ADJUSTMENT OF THE CARBURETOR

ADJUSTMENT OF THE THROTTLE WIRE

INSPECTION AND MAINTENANCE

Periodic Inspection Schedule

Table outlining inspection and maintenance tasks based on operating hours and time intervals.

Pre-Operation Inspection and Service

Procedures for cleaning the air cleaner element and servicing the spark plug before use.

Fuel Filter and Spark Arrester Cleaning

Steps for cleaning the fuel filter and the spark arrester.

LONG-TERM STORAGE

EU EXHAUST EMISSION REGULATIONS