Quick guide
1-9 Overview/Quick guide
1
E08500802730
Rotate the switch to turn on the lamps.
Refer to “Combination headlamps and
dipper switch” on page 5-43.
The turn-signal lamps flash when the lever is
operated (with the operation mode of the
power switch in ON).
Refer to “Turn-signal lever” on page 5-46.
Around the driver’s seat
1-Combination headlamps
AUTO
When the operation mode of
the power switch is in ON,
headlamps, position, tail,
licence plate, instrument
panel lamps turn on and off
automatically in accordance
with outside light level. (Day-
time running lamps will go on
while the tail lamps are off.)
All lamps turn off automati-
cally when the operation
mode of the power switch is
put in OFF.
Position, tail, licence plate
and instrument panel lamps
on
Headlamps and other lamps
go on
1-Turn-signal lever
1- Turn-signals
2- Lane-change signals
To Next Page
Loading...
