Outside rear-view mirrors
6-10 Starting and driving
6
It is possible to move the mirror up/down and
left/right to adjust its position.
When the headlamps of the vehicles behind
you are very bright, the reflection factor of
the rear-view mirror is automatically changed
to reduce the glare.
When the operation mode of the power
switch is put in ON, the green indicator (1)
illuminates and the reflection factor of the
mirror is automatically changed.
E00600901898
E00601002385
To adjust the mirror position To reduce the glare
Do not hang items on, or spray glass cleaner
on the sensor (2), as reduced sensitivity
could result.
If you want to stop automatic mode, press
the switch (3) for approximately 2 seconds
and the indicator (1) will go off.
To return to automatic mode, press the
switch again or put the operation mode of the
power switch in ON after putting the opera-
tion mode of the power switch in OFF.
Outside rear-view mirrors
To adjust the mirror position
Do not attempt to adjust the rear-view
mirrors while driving. This can be danger-
ous.
Always adjust the mirrors before driving.
Your vehicle is equipped with convex type
mirrors.
Please take into consideration, but objects
you see in the mirror will look smaller and
farther away compared to a normal flat
mirror.
Do not use this mirror to estimate distance
of following vehicles when changing lanes.
To Next Page
Loading...
Need help?
General
