Mitsubishi XPANDER HEV 2023 User Manual

Information screen display list
5-32 Instruments and controls
5
 The brake auto hold is not available. Refer to “Brake auto hold” on page 6-28.
 The Electric parking brake is not automati-
cally applied because there is a fault in the
Electric parking brake system.
 When the operation mode of the power
switch is put in OFF, put the select position
in the “P” (PARK) position and depress the
brake pedal more firmly than usual with
the right foot.
Then, operate the power switch.
 We recommend you to have the brake auto
hold system inspected by an authorised
MITSUBISHI MOTORS dealer.
Refer to “Brake auto hold” on page 6-28.
 The brake auto hold system does not turn
on because the driver’s seat belt is not fas-
tened.
 Press the brake auto hold switch after fas-
tening the driver’s seat belt.
Refer to “Brake auto hold” on page 6-28.
 The brake auto hold system does not turn
off because the brake pedal is not pressed.
 Depress the brake pedal more firmly than
usual with the right foot. Then, press the
brake auto hold switch.
Refer to “Brake auto hold” on page 6-28.
 There is a fault in the engine oil circulation
system.
 Immediately stop the vehicle in a safe
place and consult the nearest authorised
MITSUBISHI MOTORS dealer.
Refer to “Oil pressure warning display” on
page 5-42.
Screen Cause Solution (Reference)

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English