Power switch
Starting and driving 6-13
6
The indicator lamp on the power switch turns
off.
The operation mode of the power switch can-
not be put in OFF unless the electrical park-
ing switch is pressed.
Electrical devices such as the audio and
accessory socket can be operated. Can be
used when the READY indicator is off.
The indicator lamp on the power switch illu-
minates orange.
All vehicle’s electrical devices can be oper-
ated.
The indicator lamp on the power switch illu-
minates blue. The indicator lamp turns off
when the Hybrid EV System is operating.
E00631901810
If you press the power switch without
depressing the brake pedal, you can change
the operation mode of the power switch in the
order of OFF, ACC, ON, OFF.
When operating the power switch, press the
switch all the way in. If the switch is not
fully pressed, the Hybrid EV System may
not start or the operation mode of the power
switch may not change. If the power switch
is pressed correctly, there is no need to hold
the power switch down.
When the battery in the keyless operation
key has worn out, or the keyless operation
key is out of the vehicle, warning display
will appear.
Warning display (when the power switch is
pressed 1 time)
Warning display (when the power switch is
pressed 2 times or more)
Operation mode of the power
switch and its function
OFF
ACC
ON
Your vehicle is equipped with an electronic
immobilizer.
To start the Hybrid EV System, the ID code
which the transponder inside the key sends
must match the one registered in the immobi-
lizer computer. Refer to “Electronic immobi-
lizer (Anti-theft starting system)” on page
3-3.
Changing the operation mode
of the power switch