Mitsubishi XPANDER HEV 2023 User Manual

Brake auto hold
Starting and driving 6-29
6
With the operation mode of the power switch
in ON, press the brake auto hold switch. The
indicator lamp (A) on the switch will come
on.
While all of the following conditions are met,
the system will change to the standby state
and the brake auto hold standby indicator dis-
play (white) in the instrument cluster will
come on.
 The driver’s seat belt is fastened.
 The driver’s door is closed.
 The select position in any position other
than the “P” (PARK) or “R” (REVERSE)
position.
 The Electric parking brake is released.
 The vehicle is not stopped on a steep
slope.
Indicator display (white)
NOTE
 While operating the brake auto hold system,
you may hear an operation noise to increase
braking force when the system detected the
movement of the vehicle. This does not indi-
cate a malfunction.
How to use brake auto hold
To turn on brake auto hold
NOTE
 The brake auto hold system memorizes the
ON/OFF state when the Hybrid EV System
is stopped, and reflects that state the next
time the Hybrid EV System is started.
 When the brake auto hold system cannot be
used, a buzzer will sound and the following
warning will appear on the information
screen in the instrument cluster.
• If this warning appears, confirm that all of
the conditions for system operation are met
and that there is no malfunction in the sys-
tem.
• If this warning appears, fasten the driver’s
seat belt.
 If any of the following occur while the sys-
tem is in the standby state, the brake auto
hold standby indicator display (white) in the
instrument cluster will go off.
A buzzer will sound and the message will
appear on the information screen in the
instrument cluster.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When there is a malfunction in the system.
NOTE

Mitsubishi XPANDER HEV 2023 Specifications

General

Brand	Mitsubishi
Model	XPANDER HEV 2023
Category	Automobile
Language	English