Quick guide
1-15 Overview/Quick guide
1
Refer to “Drive mode” on page 6-23.
When the operation mode of the power
switch is in ON, operate the drive mode
selector (A) to change the drive mode.
Refer to “Drive mode selector” on page
6-24.
Drive mode Function
CHARGE
This mode is used when you
want to charge the drive bat-
tery and drive as an EV at
your destination. (Battery
charge mode)
EV
This mode is used when you
want to drive the vehicle as
an EV to avoid starting the
engine as much as possible in
places such as residential
areas where noise and
exhaust emissions must be
considered. (EV priority
mode)
NORMAL
This mode is suitable for
driving in a variety of road
environments that are nor-
mally used.
WET
This mode is suitable for
driving on roads that are wet
or lightly flooded with water
due to heavy rain.
GRAVEL
This mode supports driving
under bad conditions such as
on unpaved roads.
TARMAC
This mode is suitable for
driving on dry, paved roads,
and features enhanced power
performance and stability.
MUD
This mode is suitable for
driving on bad roads and is
used when a large amount of
power is required, such as
when driving on muddy
roads.
Drive mode selector
Drive mode Function
To Next Page
Loading...
Need help?
General
