Mitsubishi XPANDER HEV 2023

Cruise control
Starting and driving 6-41
6
E00609302993
1. With the operation mode of the power
switch in ON, press the CRUISE CON-
TROL ON/OFF switch (A) to turn on the
cruise control. The indicator display
(grey) appears on the information screen
in the instrument cluster.
Type 1
Type 2
2. Accelerate or decelerate to your desired
speed, then press down and release the
“SET -” switch (B) when the indicator
display (grey) appears on the information
screen in the instrument cluster. The vehi-
cle will then maintain the desired speed.
The set vehicle speed indicator (green)
appears on the information screen in the
instrument cluster.
Type 1
Type 2
E00609402141
There are two ways to increase the set speed.
Press up and hold the “RES +” switch (C)
while driving at the set speed, and your speed
will increase in increments of 5 km/h.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To activate
NOTE
 When you release the “SET -” switch (B),
the vehicle speed will be set.
To increase the set speed
RES + switch