Security alarm system
3-20 Locking and unlocking
3
It is possible to cancel the system activation
during the system preparation mode or the
system armed mode.
In addition, it is possible to cancel the alarm
once it has been activated.
Refer to “Cancelling the system” on page
3-21, “Cancelling the alarm” on page 3-22.
E00301702930
Follow the procedure below to set the system
to the system armed mode.
1. Put the operation mode of the power
switch in OFF.
2. Exit the vehicle and close all of the doors
and tailgate.
3. Press the LOCK switch (A) on the key,
the driver’s or front passenger’s door
lock/unlock switch (B), or the tailgate
lock switch (C) in order to lock all the
doors and the tailgate.
By locking the vehicle using the keyless
entry system or the keyless operation
function, the system preparation mode is
activated.
The buzzer makes an intermittent beeping
sound and the security indicator lamp in
the instrument cluster blinks for confirma-
tion.
Indicator lamp
The alarm will resume if unlawful actions
are taken again, even if the alarm has
stopped.
System cancellation
When lending the vehicle to another person
or allowing the vehicle to be driven by some-
one who is unfamiliar with the security alarm
system, be sure to give the person a proper
explanation of the security alarm system.
If a person who is unfamiliar with the secu-
rity alarm system accidentally unlocked the
vehicle, causing the alarm to sound, the
alarm would be a nuisance to people nearby.
Setting the system
Driver’s or front passenger’s door lock/unlock
switch
The system preparation mode is not activated
when the doors and the tailgate have been
locked using a method other than the keyless
entry system or the keyless operation func-
tion (namely a key, the inside lock knob or
the central door lock switch).
To Next Page
Loading...
Need help?
General
