Seat belts
4-14 Seat and seat belts
4
E00405201432
The second-centre 3-point type seat belt must
be worn correctly as illustrated.
1. Pull out the buckle (C) from the seat cush-
ion.
2. Pull the seat belt and insert the small latch
plate (A) into the buckle (C).
3. Insert the latch plate (B) into the buckle
(D).
4. Pull the belt slightly to adjust slackness as
desired.
1. Hold the latch plate (B) and press the but-
ton on the buckle (D).
2. To release the buckle (C), press the button
(E) with a narrow-tipped object (latch
plate (B), mechanical key, etc.).
For the front passenger seat, the warning
function works only while a person is sitting
on the seat.
When luggage is placed on the front passen-
ger seat, a sensor in the seat cushion may,
depending on the weight and position of the
luggage, cause the warning tone to sound
and the warning display (red) to appear.
Second-centre 3-point type seat
belt
Be sure to securely connect the both latch
plate (A and B). Failing to do so could sig-
nificantly reduce the amount of protection
and cause serious injures in a collision or a
sudden stop.
To fasten
To unfasten
To Next Page
Loading...
Need help?
General
