Child restraint
Seat and seat belts 4-19
4
E00406804003
Selecting the child restraint system for each seating position
Suitable for “universal” category child restraint systems that
can be secured using the vehicle’s seat belts
Suitable for i-Size and ISOFIX child restraint systems
Suitable for forward facing child restraint systems only
Rearward facing child restraint systems must not be installed
Not suitable for a child restraint system
This seat is equipped with a top tether anchor
*1: When installing a child restraint system, remove the head restraint
from the seat and move the seat to the rearmost position.
*2: Please do not remove the head restraint when installing the booster
cushion (see page 4-20, 4-22).
*3: When installing a child restraint system on the front passenger
seat, adjust the seatback angle to 5 steps rearward from the most
upright position.
*4: When installing a child restraint system on a second row outboard
seat, adjust the seatback angle to 2 steps rearward from the most
upright position.
To Next Page
Loading...
