14
5. Operation
5.1 Power on/off
1) Power on: when camera is off, press ( ) button, camera will power up
and enter standby mode;
z Boot up image shows up;
z Working status LED indicator turns green;
z Boot up music;
z Camera vibrates;
z Camera voice “beeps” when [Record Warning] is ON.
2) Power off: press and hold power (
) button for 2 seconds to turn off
working-status camera:
z Save video/audio files before power-off;
z Working status indicator turns off;
z Power off image;
z Power off music;
z Camera vibrates.
5.2 Resetting
Press reset button (inside HDMI port) to have camera resetting when
camera works abnormally. Please note: DO NOT PRESS this button except
maloperation.
5.3 Infrared Night Vision
While under dark circumstances, infrared LED will help to record clear image
or video in HD.
In standby mode, PRESS Menu (
) button to navigate. Find option
【Infrared】, PRESS OK (
) button to enter sub-menu: Manual & Auto,
press OK (
) button to select.
1) Auto infrared mode:
In low light situations (3 Lux), 8 IR LEDs will be turned on automatically,
camera switches on infrared filter lens, video image turn black and white.
To Next Page
Loading...