16
5.8 Audio Recording
In standby mode, PRESS Audio ( ) button, with a beep and camera
vibration, LED indicator turn yellow and flashes, audio recording started.
PRESS Audio ( ) button again to stop audio recording.
5.9 One Button recording
When camera is powered off, HOLD Record ( ) button, camera will
initiate and start video recording immediately.
5.10 Tag Important file
In audio or video recording, PRESS importance tag ( ) button, camera
vibrates, the audio or video file will be tagged important, with a yellow icon
( ) showing on the top right of the LCD screen.
5.11 Device ID/ User ID
In standby mode, PRESS Menu ( ) button to enter settings. Find [ID
setting], PRESS OK (
) button to select. Enter the password, the default
password is: 00000. After right password entered, the Device & Person SN
interface show up, 5 characters for device and 6 characters for Person.
PRESS scroll-Up (
) button or Scroll-down ( ) button to highlight a
character, then PRESS OK (
) button to select.
5.12 Time Setting
In standby mode, PRESS Menu ( ) button to enter settings. Find Time bar,
for example, 2008/02/02 07:40. PRESS OK (
) button and enter the
password, then users can change the date and time.
Press Scroll-Up (
) button or Scroll-down ( ) button to highlight a
character, the PRESS OK (
) button to select.
5.13 USB Driver
To Next Page
Loading...