EN-3
5-2 Pairing the headphones with a phone
1. Make sure the headphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press and hold the power button for 8-10 seconds until the
LED flashes blue and red alternately, which means pairing
mode.
4. Start Bluetooth function on your phone and search for new
devices.
5. Select the “Mixcder ShareMe 7” to pair. Once successfully
paired, the LED turns to solid blue. You will hear “Pairing
successful, connected”.
5-3 ShareMe function
The music or audio program will be shared among two
headphones and the Bluetooth-enabled device simultane-
ously.
1. Make sure the headphones and the connected Bluetooth-
enabled device are off.
2. Do not place all devices more than one meter away from
each other.
3. Press and hold the power buttons located on each of
headphones for 8-10 seconds until the LED flashes blue and
red alternately, which means pairing mode.
4. Two headphones will pair to each other automatically. Once
successfully paired, one headphone voices “Connected, left
channel” and the LED flashes blue and red alternately, which
means the primary headphone. The other headphone voices
“Connected, right channel” and the LED turns to solid blue,
which means secondary headphone.
5. Start Bluetooth function of the device and select the
“Mixcder ShareMe 7” to pair the primary headphone.
1. Make sure the headphone is off.
2. Start the Bluetooth program in the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than one meter away from
each other.
5. Press and hold the power button for 8-10 seconds until the
LED flashes blue and red alternately to enter pairing mode.
6. As soon as the system detects the new device and select
“Mixcder ShareMe 7". Once successfully paired, the LED turns to
solid blue. You will hear “Pairing successful, connected”.
6. Once successfully paired, the LED turns to solid blue. You
will hear “Second device connected”.
To Next Page
Loading...