Need help?Do you have a question about the µ-Dimension BST 1200es and is the answer not in the manual?
General| Layer Resolution | 0.05 - 0.3 mm |
|---|---|
| Nozzle Temperature | Up to 260°C |
| Filament Diameter | 1.75 mm |
| Printing Technology | Fused Deposition Modeling (FDM) |
| Nozzle Diameter | 0.4 mm (interchangeable) |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD Card |
| Power Requirements | 110-240V, 50-60Hz |
Instructions on how to navigate and use the user manual effectively.
Information on accessing additional resources like the User Guide CD and website.
Information on recycling procedures and resources for material cartridges.
Essential safety measures to prevent printer damage and ensure user safety.
Recommended procedures for unpacking and preparing the printer for its first use.
Explains two methods for connecting the printer to a workstation via network.
Details the procedure for making all power connections to the printer.
Guides for installing CatalystEX and system software on the workstation.
Guides on establishing network communication between workstation and printer.
Instructions for correctly inserting the modeling base into the printer.
Overview of the printer's main user interface, including the display panel and keypad.
Explains the different states and functions accessible via the printer's display panel.
Details the functionalities of the CatalystEX software for processing STL files.
Steps and options for preparing STL files for printing using CatalystEX.
How to adjust the size of the part by scaling the STL file.
How to orient parts for optimal build speed, strength, and surface finish.
Instructions for correctly inserting the modeling base into the printer.
How to build preloaded test parts to familiarize with the system.
How to pause a build operation, e.g., for material replacement.
Procedure for canceling a print job currently in progress.
Safely powering down the Dimension printer.
Steps for safely removing a finished part from the printer.
Instructions for removing breakaway and soluble supports.
Lists the tools provided in the startup kit for system maintenance.
Procedures for routine maintenance to ensure printer performance.
Routine daily checks and cleaning procedures for the printer.
Details the preventive maintenance tasks recommended at 500-hour intervals.
Procedure for replacing the tip wipe assembly.
Instructions for replacing the tip shields on the printer head.
Procedure for replacing the liquefier tips.
Steps for performing tip calibration after tip replacement.
Maintenance tasks that do not have a routine schedule.
Instructions for replacing a burnt-out chamber light bar.
A list of common problems and their corresponding solutions.
Steps to identify and diagnose issues with material extrusion.
Steps to clear a clogged extrusion tip.
Procedure to clear a material jam in the printer head.
Detailed steps to recover from a loss of extrusion issue.
Information on contacting Stratasys for technical support and troubleshooting assistance.
Dimensions and weight of the Dimension 1200es printer.
Requirements for installation location, power, and air circulation.
Recommended specifications for the computer workstation.
Operating temperature, humidity, and heat emission for the printer.
Information on the warranty for Stratasys products.
Document declaring compliance with EU directives for the device.
FCC statements, Canadian EMC, and MSDS information.
How to use and install an Uninterruptible Power Supply for safe printer shutdown.
To Next Page
