Legal Notice
The only warranties for Stratasys products and
services are set forth in the express warranty
statement accompanying such products and
services. Nothing herein should be construed
as constituting an additional warranty.
Stratasys shall not be liable for technical or
editorial errors or omissions contained herein.
© 2013 Stratasys Inc. All rights reserved.
Stratasys, Dimension, uPrint, Catalyst, FDM,
Dimension BST, Dimension SST, WaveWash,
and Ecoworks are registered trademarks of
Stratasys Inc. FDM Technology, Fused
Deposition Modeling, ABSplus, Catalyst EX,
and Smart Supports are trademarks of
Stratasys, Inc. All other trademarks are the
property of their respective owners, and
Stratasys assumes no responsibility with regard
to the selection, performance, or use of these
non-Stratasys products. Product specifications
are subject to change without notice.
To Next Page
Loading...
Need help?
General
